6.4 Hemi MDS Lifters Camshaft Kit w/Head Gaskets Set Timing Chain Kit Fit For Jeep Grand Cherokee Dodge Challenger Charger Chrysler 300 6.4L V8 2011-2019 5038419AB HS26568PT 53021726AD
$549.00
Complete Redline Engine Supply MDS camshaft, lifter, head gasket, and timing kit for select 2011-2019 6.4L 392 HEMI V8 engines. Includes one camshaft, 16 MDS hydraulic roller lifters, four lifter trays, timing chain kit, head gaskets, valve cover gaskets, 30 head bolts, manifold gaskets, and valve stem seals.
- Designed for factory MDS-equipped 6.4L HEMI engines
- Includes 8 front and 8 rear MDS lifters
- Camshaft and timing chain kit included
- Head gaskets and 30 head bolts included
- Upper-engine gaskets and valve stem seals included
- Brand: Redline Engine Supply
Professional Installation Recommended
This kit is intended for major internal engine, cylinder head, and timing-system service. Installation should be completed by a qualified machinist, engine builder, or automotive technician familiar with 6.4L HEMI MDS engines.
Recommended Inspection Procedures
- Inspect all camshaft lobes and journals for scoring, pitting, or abnormal wear.
- Inspect the camshaft bearings before installing the replacement camshaft.
- Check rocker arms, rocker shafts, pushrods, and related valvetrain components.
- Inspect the MDS solenoids and associated oil-control passages.
- Check the cylinder heads for cracks, warpage, and damaged sealing surfaces.
- Inspect valve guides, valve seats, springs, retainers, and locks.
- Inspect timing guides, sprockets, tensioners, and related components during installation.
- Clean all engine oil passages and internal surfaces thoroughly.
- Remove all metallic debris caused by the original camshaft or lifter failure.
- Verify adequate engine oil pressure before returning the vehicle to service.
- Prime the lubrication system before initial startup.
- Follow the factory timing alignment, torque sequence, and tightening procedures.
- Use new engine oil and a new oil filter after assembly.
Fitment Notice
This kit is intended for select 6.4L 392 HEMI engines equipped with the factory Multi-Displacement System. It is not intended for non-MDS engines or MDS-delete conversions.
Vehicle model and year alone do not guarantee compatibility. Confirm the VIN, production date, engine configuration, camshaft design, front and rear lifter design, timing components, gasket configuration, and reference part numbers before purchasing.
Warranty Information
The stated lifetime warranty applies when the kit is installed by a certified machinist and remains subject to the manufacturer’s complete warranty requirements. Proof of professional installation may be required.
Warranty coverage may not apply to damage caused by improper installation, inadequate lubrication, contaminated oil passages, insufficient oil pressure, overheating, incorrect valve timing, unresolved valvetrain damage, or failure to correct the original cause of engine failure.
Description
Description
2011-2019 6.4L 392 HEMI MDS Camshaft, Lifter, Head Gasket and Timing Kit
Complete a comprehensive top-end and timing-system repair on your 6.4L 392 HEMI with this Redline Engine Supply MDS camshaft and lifter kit. Designed for select Dodge, Chrysler, and Jeep applications, this package combines the major valvetrain, sealing, and timing components commonly replaced during camshaft, lifter, or cylinder head service.
The kit includes one MDS camshaft, 16 MDS hydraulic roller lifters, four lifter trays with mounting bolts, a timing chain kit, cylinder head gaskets, valve cover gaskets, cylinder head bolts, intake and exhaust manifold gaskets, and valve stem seals.
Complete Kit Includes
- 1 MDS camshaft
- 8 front MDS hydraulic roller lifters
- 8 rear MDS hydraulic roller lifters
- 4 lifter trays with mounting bolts
- 1 timing chain kit
- 2 cylinder head gaskets
- 2 valve cover gaskets
- 30 cylinder head bolts
- 20 long cylinder head bolts
- 10 short cylinder head bolts
- Intake manifold gaskets
- Exhaust manifold gaskets
- Valve stem seals
Designed for Factory MDS Engines
The supplied camshaft and hydraulic roller lifters are intended for compatible 6.4L HEMI engines equipped with the factory Multi-Displacement System. This is an MDS replacement package and is not intended for MDS-delete conversions.
Top-End and Timing-System Repair Package
This package provides the primary components commonly required when repairing worn camshaft lobes, failed MDS lifters, valvetrain noise, engine misfires, timing-system wear, or cylinder head gasket concerns. Combining these parts into one kit helps simplify sourcing during a major engine repair.
Common Repair Applications
- Collapsed or damaged MDS lifters
- Worn or scored camshaft lobes
- Valvetrain ticking or tapping noise
- Camshaft and lifter-related misfires
- Timing chain or timing component wear
- Cylinder head gasket replacement
- Valve stem seal replacement
- Upper-engine resealing
- Major top-end engine overhaul
Vehicle Compatibility
- 2011-2019 Dodge Challenger 6.4L 392 HEMI V8
- 2012-2019 Dodge Charger 6.4L 392 HEMI V8
- 2012-2014 Chrysler 300 6.4L 392 HEMI V8
- 2012-2017 Jeep Grand Cherokee 6.4L 392 HEMI V8
Important: Compatibility varies by model year, VIN, production date, engine configuration, and original component design. Compare the listed reference numbers with the parts removed from the engine before ordering.
Additional information
| Brand | Redline Engine Supply |
|---|---|
| Manufacturer | Redline USA |
| Engine | 6.4L 392 CID HEMI V8 |
| Fitment Years | 2011-2019, depending on vehicle model |
| MDS Compatibility | Yes |
| Camshaft Quantity | 1 |
| Front MDS Lifters | 8 |
| Rear MDS Lifters | 8 |
| Total Lifter Quantity | 16 |
| Lifter Trays | 4 with mounting bolts |
| Timing Chain Kit | Included |
| Cylinder Head Gaskets | 2 |
| Valve Cover Gaskets | 2 |
| Cylinder Head Bolts | 30 total |
| Head Bolt Breakdown | 20 long bolts and 10 short bolts |
| Intake Manifold Gaskets | Included |
| Exhaust Manifold Gaskets | Included |
| Valve Stem Seals | Included |
| Exterior Finish | Polished |
| Package Weight | Approximately 22 lb |
| Package Dimensions | Approximately 24 × 14 × 4 in. |
| Warranty | Lifetime when installed by a certified machinist, subject to manufacturer terms |
Reference and Interchange Numbers
Camshaft:
5038419AB
MDS Lifter References:
53021726AD
53021726AE
5038785AD
Cylinder Head Gasket Set:
HS26568PT
05038281AE
05038281AD
5038281AE
5038281AD
68159796AA
68159796AB
68159796AC
Valve Cover Gasket References:
53021569AC
05114179AB
68060360AA
53021572AC
53022314AD
53021535AE
05114179AA
5114179AB
53021569AD
Intake Manifold Gasket References:
53022320AB
53022143AB
Exhaust Manifold Gasket References:
05038098AA
05037398AC
5038098AA
05038099AA
5038099AA
5037398AC
Package Components
- MDS camshaft
- 16 MDS hydraulic roller lifters
- 4 lifter trays with bolts
- Timing chain kit
- 2 cylinder head gaskets
- 2 valve cover gaskets
- 30 cylinder head bolts
- Intake manifold gaskets
- Exhaust manifold gaskets
- Valve stem seals
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.