REDLINE USA 6.4L HEMI MDS Lifters Camshaft Kit Head Gasket Bolts Water Pump VVt Timing for Dodge Challenger Charger for Chrysler 300 for Jeep Grand Cherokee 6.4L 392ci V8 2011-2022
$749.00
Comprehensive Redline Engine Supply repair kit for select 2011-2015 6.4L 392 HEMI MDS engines. Includes an MDS camshaft, 16 hydraulic roller lifters, lifter trays, MLS head gasket set, cylinder head bolts, timing chain kit, VVT sprocket, water pump, oil pan gasket set, and related upper-engine gaskets.
- Designed for compatible 6.4L 392 HEMI MDS and VVT engines
- Includes MDS camshaft and 16 hydraulic roller lifters
- MLS head gasket set and head bolts included
- Timing chain kit and VVT sprocket included
- Water pump and lower oil pan gasket set included
- Brand: Redline Engine Supply
Professional Installation Recommended
This kit is intended for major internal engine, cylinder head, timing-system, and cooling-system service. Installation should be completed by a qualified machinist, engine builder, or automotive technician familiar with 6.4L HEMI MDS and VVT engines.Recommended Inspection Procedures
- Inspect the rocker arms, rocker shafts, and pushrods for wear or damage.
- Inspect the camshaft bearings and journals before installing the new camshaft.
- Check the MDS solenoids and related oil-control passages.
- Inspect the cylinder heads for warpage, cracks, and valve-seat damage.
- Inspect the timing cover and crankshaft sealing surfaces.
- Flush the cooling system before installing the new water pump.
- Clean all engine oil passages and internal surfaces thoroughly.
- Remove all metallic debris created by the original camshaft or lifter failure.
- Verify proper engine oil pressure before returning the vehicle to service.
- Prime the lubrication system before initial startup.
- Follow the factory timing alignment, torque sequence, and tightening procedures.
- Use new engine oil, coolant, and filters after assembly.
Fitment Notice
This kit is intended for select 6.4L 392 HEMI engines equipped with factory MDS and VVT. It is not intended for non-MDS engines or MDS-delete conversions. The supplied title lists a broad 2011-2022 range; however, the detailed application data confirms only the following:- 2011-2015 Dodge Challenger
- 2012-2015 Dodge Charger
- 2012-2014 Chrysler 300
- 2012-2015 Jeep Grand Cherokee
Warranty Information
The stated lifetime warranty applies when the components are installed by a certified machinist and remains subject to the manufacturer’s complete warranty terms. Proof of professional installation may be required. Warranty coverage may not apply to failures caused by improper installation, contaminated oil passages, inadequate lubrication, insufficient oil pressure, overheating, incorrect valve timing, cooling-system contamination, or failure to correct the original cause of engine damage.Description
Description
2011-2015 6.4L 392 HEMI MDS Camshaft, Lifter, Timing and Water Pump Kit
Complete a comprehensive top-end and timing-system repair on your 6.4L 392 HEMI with this Redline Engine Supply MDS camshaft and lifter kit. Designed for select Dodge, Chrysler, and Jeep vehicles equipped with the 6.4L HEMI V8, this package combines the major valvetrain, sealing, timing, cooling, and lubrication components commonly replaced during extensive engine service.
The kit includes an MDS camshaft, 16 MDS hydraulic roller lifters, lifter trays with bolts, an MLS head gasket set, cylinder head bolts, upper-engine gaskets, a timing chain kit, VVT sprocket, water pump, and lower oil pan gasket set.
Complete Kit Includes
- 1 MDS camshaft
- 16 MDS hydraulic roller lifters
- Lifter trays with mounting bolts
- 1 MLS cylinder head gasket set
- 2 sets of cylinder head bolts
- Valve cover gaskets
- Intake manifold gaskets
- Exhaust manifold gaskets
- Valve stem seals
- 1 timing chain kit
- 1 VVT sprocket
- 1 lower oil pan gasket set
- 1 water pump
Designed for Factory MDS and VVT Engines
The included camshaft, hydraulic roller lifters, and VVT timing components are designed for compatible 6.4L HEMI engines equipped with the factory Multi-Displacement System and Variable Valve Timing. This package retains the original MDS configuration and is not intended as an MDS-delete kit.
Comprehensive Repair Package
This kit provides many of the primary components needed when repairing camshaft wear, failed MDS lifters, timing-system wear, cylinder head gasket problems, or cooling-system concerns. Combining these components into one package helps reduce the need to source each part separately.
Common Repair Applications
- Collapsed or damaged MDS lifters
- Worn or scored camshaft lobes
- Valvetrain ticking or tapping noise
- Camshaft and lifter-related misfires
- Timing chain or VVT component wear
- Cylinder head gasket replacement
- Water pump replacement during engine service
- Upper-engine resealing
- Major top-end engine overhaul
Vehicle Compatibility
- 2011-2015 Dodge Challenger 6.4L 392 HEMI V8
- 2012-2015 Dodge Charger 6.4L 392 HEMI V8
- 2012-2014 Chrysler 300 6.4L 392 HEMI V8
- 2012-2015 Jeep Grand Cherokee 6.4L 392 HEMI V8
Important: The supplied product title references 2011-2022 applications, but the detailed fitment information only confirms the model years listed above. Verify the VIN, production date, engine configuration, MDS system, VVT design, and original part numbers before ordering.
Additional information
| Brand | Redline Engine Supply |
|---|---|
| Manufacturer | Redline USA |
| Engine | 6.4L 392 CID HEMI V8 |
| Confirmed Fitment Years | 2011-2015, depending on vehicle model |
| MDS Compatibility | Yes |
| VVT Compatibility | Yes |
| Camshaft | MDS replacement camshaft |
| Lifter Type | MDS hydraulic roller |
| Lifter Quantity | 16 |
| Lifter Trays | Included with mounting bolts |
| Head Gasket Construction | Multi-layer steel |
| Cylinder Head Bolts | 2 sets included |
| Timing Chain Kit | Included |
| VVT Sprocket | Included |
| Water Pump | Included |
| Lower Oil Pan Gasket Set | Included |
| Condition | New |
| Package Weight | Approximately 30 lb |
| Package Dimensions | Approximately 24.8 × 11.81 × 12.99 in. |
| Exterior Finish | Machined |
| Warranty | Lifetime when installed by a certified machinist, subject to manufacturer terms |
Reference and Interchange Numbers
Primary References: 53021726AD HS26568PT 5038419AB Additional References: 5038684AA 53021726BC 5038785AD 53022316AC 53022243AF 53022340ACPackage Components
- MDS camshaft
- 16 MDS hydraulic roller lifters
- Lifter trays with bolts
- MLS head gasket set
- 2 cylinder head bolt sets
- Valve cover gaskets
- Intake manifold gaskets
- Exhaust manifold gaskets
- Valve stem seals
- Timing chain kit
- VVT sprocket
- Lower oil pan gasket set
- Water pump
Reviews (0)
Only logged in customers who have purchased this product may leave a review.















Reviews
There are no reviews yet.